Arbortech AS170 Spezifikationen PDF herunterladen (Seite 4)

3) Personal safety

a) Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the inﬂuence of drugs, alcohol or medication. A

moment of inattention while operating power tools

may result in serious personal injury.

b) Use safety equipment. Always wear eye

protection. Safety equipment such as dust

mask, nonskid safety shoes, hard hat, or hearing

protection used for appropriate conditions will

reduce personal injuries.

c) Avoid accidental starting. Ensure the switch

is in the off-position before plugging in. Carrying

power tools with your ﬁnger on the switch or

plugging in power tools that have the switch on

invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times. This enables better control of

the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewellery

or long hair can be caught in moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

these devices can reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application. The correct power

tool will do the job better and safer at the rate for

which it was designed.

b) Do not use the power tool if the switch does

not turn it on and off. Any power tool that cannot

be controlled with the switch is dangerous and must

be repaired.

c) Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool. Power tools are dangerous

in the hands of untrained users.

e) Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may affect the

power tools operation. If damaged, have the

power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits

etc. in accordance with these instructions and

in the manner intended for the particular type

of power tool, taking into account the working

conditions and the work to be performed. Use

of the power tool for operations different from those

intended could result in a hazardous situation

5) Service

a) Have your power tool serviced by a qualiﬁed

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

NOTE: Refer to the assembly (section 5) for a list

of user replacable parts.

3. SPECIFIC SAFETY RULES

1. Hold tool by insulated gripping surfaces when

performing an operation where the cutting tool

may contact hidden wiring or its own cord.

Contact with a “live” wire will make exposed metal

parts of the tool “live” and shock the operator.

2. Remove adjusting tools such as Allen & Ian

keys and wrenches before operating the tool.

3. Do not operate the tool with any attachment

other than those recommended in this instruction

manual.

4. Only use the tool with the correct voltage, as

speciﬁed in the tool lable.

5. Never start a tool under load. Start the tool before

engaging the work piece.

6. Never start or operate the tool with ﬁngers or

other objects through the holes in the blades.

7. Use care when handling blades during and

ENGLISH 3

1 2 3 4 5 6 7 8 9 ... 13 14

Kommentare zu diesen Handbüchern

Keine Kommentare

Arbortech AS170 Spezifikationen Seite 4

Kommentare zu diesen Handbüchern